Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(b) Remove the 2 bolts and oil cooler support bracket.
6. REMOVE RADIATOR SUPPORT TO FRAME SEAL RH
(a) Remove the 2 clips and radiator support to frame seal RH.
7. REMOVE TRANSMISSION OIL COOLER AIR DUCT
(a) Remove the 4 bolts and remove the No. 1 transmission oil cooler air duct and No. 2 transmission oil cooler air duct.
8. REMOVE NO. 2 OIL COOLER TUBE SUB-ASSEMBLY
(a) Remove the bolt and loosen the 2 clips. Then remove the No. 2 oil cooler tube sub-assembly.
9. REMOVE NO. 1 TRANSMISSION OIL COOLER HOSE
(a) Loosen the 2 clips and remove the 2 No. 1 transmission oil cooler hoses.
Installation
AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: AIR COOLED OIL COOLER: INSTALLATION