Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1608003.png)
2. REMOVE FRONT DOOR SCUFF PLAT
a. Remove the 4 screws and front door scuff plate.
b. Employ the same manner described above to the other side.
3. REMOVE COWL SIDE TRIM BOARD
a. Remove the nut and cowl side trim board.
b. Employ the same manner described above to the other side.
4. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP
5. REMOVE FRONT PILLAR GARNISH
a. Remove the assist grip.
1. Using a screwdriver, remove the 2 assist grip plugs.
HINT: Tape the screwdriver tip before use.
2. Remove the 2 screws and assist grip.
b. Remove the front pillar garnish.
c. Employ the same manner described above to the other side.
