Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
16. w/ Rear No.2 seat: REMOVE QUARTER TRIM HOLE COVER
a. Using a screwdriver, remove the quarter trim hole cover.
HINT: Tape the screwdriver tip before use.
b. Employ the same manner described above to the other side.
17. w/ Rear No.2 seat: REMOVE QUARTER TRIM UPPER BELT HOLE COVER
a. Using a screwdriver, remove the quarter trim upper belt hole cover.
HINT: Tape the screwdriver tip before use.
b. Employ the same manner described above to the other side.
18. REMOVE QUARTER TRIM PANEL LH
a. w/o Rear A/C:
Using a screwdriver, remove the deck side trim cover.
HINT: Tape the screwdriver tip before use.
b. w/o Tonneau cover:
Using a screwdriver, remove the 2 No.1 tonneau cover holder caps.
HINT: Tape the screwdriver tip before use.
c. Remove the 2 package holder net hooks.
d. Remove the rear No.1 seat outer belt floor anchor.
Torque: 42 N.m (430 kg.cm, 31 ft.lb)