Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1608009.png)
21. REMOVE NO.2 REAR WINDOW SIDE GARNISH
a. Remove the 2 clips and No.2 rear window side garnish.
b. Employ the same manner described above to the other side.
22. REMOVE REAR NO.1 SEAT OUTER BELT SHOULDER ANCHOR
a. Using a screwdriver, remove the anchor cap.
HINT: Tape the screwdriver tip before use.
b. Remove the rear No.1 seat outer belt shoulder anchor.
Torque: 42 N.m (430 kg.cm, 31 ft.lb)
c. Employ the same manner described above to the other side.
23. REMOVE REAR WINDOW SIDE GARNISH
a. Remove the rear window side garnish.
b. Employ the same manner described above to the other side.
24. w/ Sliding roof: REMOVE MAP LIGHT
a. Using a screwdriver, remove the lens.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 screws and map light, then disconnect the connector.
