Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1609004.png)
a. Using a screwdriver, remove the lens.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 screws and dome light, then disconnect the connector.
13. REMOVE REAR TRIM COVER
Using a screwdriver, remove the rear trim cover.
HINT: Tape the screwdriver tip before use.
14. REMOVE REAR TRIM
Using a screwdriver, remove the rear trim.
HINT: Tape the screwdriver tip before use.
15. REMOVE REAR FLOOR MAT SUPPORT PLATE
16. w/o Rear No. 2 seat:
