Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
d. Remove the rear No. 1 seat outer belt floor anchor.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
e. Remove the 3 bolts, clip and quarter trim panel LH, then disconnect the connector.
19. REMOVE QUARTER TRIM PANEL RH
a. w/o Tonneau cover:
Using a screwdriver, remove the 2 No. 1 tonneau cover holder caps.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 package holder net hooks.
c. Remove the rear No. 1 seat outer belt floor anchor.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
d. Remove the 3 bolts, clip and quarter trim panel RH.
20. w/ Rear No. 2 seat:
REMOVE REAR NO. 2 SEAT OUTER BELT SHOULDER ANCHORS
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
21. REMOVE NO. 2 REAR WINDOW SIDE GARNISH