Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
a. Remove the 2 screws.
b. Using a screwdriver, remove the roof console box.
HINT: Tape the screwdriver tip before use.
c. Disconnect the connector.
26. w/o Sliding roof:
REMOVE ROOF CONSOLE BOX
a. Remove the 4 screws.
b. Using a screwdriver, remove the roof console box.
HINT: Tape the screwdriver tip before use.
c. Disconnect the connectors.
27. REMOVE ASSIST GRIPS
28. w/ Sliding roof:
REMOVE SLIDING ROOF OPENING TRIM
29. REMOVE SUN VISORS AND HOLDERS
30. REMOVE ROOF HEADLINING
a. Using a clip remover, remove the 2 clips.
b. Remove the roof headlining.
31. w/ Rear A/C:
REMOVE REAR AIR DUCTS