toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Keyless Entry Transmitter Battery|Testing and Inspection|Page 6710 > < Keyless Entry Transmitter Battery|Testing and Inspection|Page 6708
Page 3
background image

4. Connector disconnected:

INSPECT WIRELESS DOOR LOCK CONTROL RECEIVER CIRCUIT
Disconnect the connector from the receiver and inspect the connector on the wire harness side, as shown.
If the circuit is not as specified, inspect the circuits connected to other parts.

5. Connector connected:

INSPECT WIRELESS DOOR LOCK CONTROL RECEIVER CIRCUIT
Connect the wire harness side connector to the receiver and inspect the wire harness side connector from the back side, as shown.
If circuit is as specified, replace the receiver.
If the circuit is not as specified, inspect the circuits connected to other parts.

Keyless Entry Transmitter Battery|Testing and Inspection|Page 6710 > < Keyless Entry Transmitter Battery|Testing and Inspection|Page 6708