Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Power Door Lock Actuator: Testing and Inspection
INSPECT DRIVER'S DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the door lock cable moves to
UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.
INSPECT PASSENGER'S DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 6, and check that the door lock cable moves to
UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.
INSPECT REAR LEFT SIDE DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the door lock cable moves to
UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.