Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1075002.png)
2. REMOVE SKID CONTROL ECU
Using a E5 torx wrench, remove the 4 screws and skid control ECU.
Torque: 1.8 Nm (18 kgf-cm, 16 inch lbs.)
NOTICE: Protect the actuator in order to prevent sealing surface from getting dirty and causing damage on the valve body. If the dirt and the like
is stuck to the sealing surface, use plastic tools or soft objects to remove the dirt. Do not use chemical solvents.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
