Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1102003.png)
Parts Information
Repair Procedure
1.
REMOVE FRONT WHEEL
2.
4WD:
REMOVE GREASE CAP
Using a screwdriver and hammer, remove the grease cap.
3.
4WD:
DISCONNECT DRIVE SHAFT
A.
Remove the cotter pin and lock cap.
B.
While applying the brakes, remove the lock nut.
4.
DISCONNECT ABS SPEED SENSOR AND WIRE HARNESS CLAMP FROM STEERING KNUCKLE
