Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
C.
Wrap the bolt's head with vinyl tape to prevent the drive shaft boot from being damaged.
D.
Pry down the lower suspension arm to remove the bolt and disconnect the shock absorber.
E.
Remove the 3 nuts and shock absorber with the coil spring.
NOTE:
Do not damage the brake tube.
8.
DISCONNECT LOWER BALL JOINT
Remove the 4 bolts and disconnect the lower ball joint.
9.
REMOVE STEERING KNUCKLE
A.
Remove the cotter pin and loosen the nut.
B.
Using the following SSTs, disconnect the steering knuckle.