Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
NOTE:
Take care not to scratch the serration of the speed sensor rotor.
20.
2WD:
INSTALL NEW LOCK NUT
A.
Using the following SST, install and torque a NEW lock nut to the axle hub.
^
00002-00909 (09318-12010)
NOTE:
Do NOT use air wrench.
Torque: 274 N.m (2,800 kgf.cm, 203 ft.lbf)
B.
Using a chisel and hammer, stake the lock nut.
21.
4WD:
INSTALL BEARING SPACER
Using the following SSTs and a press, install the bearing spacer.
^
09950-60010 (09951-00650)
^
09950-70010 (09951-07150)
22
4WD:
INSTALL NEW OIL SEAL (INSIDE)