Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Remove the 2 bolts and disconnect the ABS speed sensor and wire harness clamp from the steering knuckle.
5.
DISCONNECT BRAKE LINE
Using SST, disconnect the brake line. Use a container to catch the brake fluid.
^
09023-00100
6.
REMOVE BRAKE CALIPER AND DISC
A.
Remove the bolt and brake line clamp from the steering knuckle.
B.
Remove the 2 bolts, brake caliper and disc.
7.
REMOVE SHOCK ABSORBER
A.
Disconnect Shock Absorber from lower suspension arm.
B.
Remove the shock absorber lower side set nut and washer.
NOTE:
Do not remove the bolt.