Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Brake Master Cylinder: Service and Repair
Disassembly and Assembly
DISASSEMBLY
1. REMOVE RESERVOIR
(a) Remove the set screw and pull out the reservoir.
Torque: 1.5 Nm (15 kgf-cm, 13 inch lbs.)
(b) Remove the cap and strainer from the reservoir.
2. REMOVE 2 GROMMETS
3. REMOVE SEAL
4. REMOVE 2 MASTER CYLINDER PRESSURE SENSORS
Torque: 25 Nm (250 kgf-cm, 18 ft. lbs.)
INSPECTION