Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
7. REMOVE BRAKE BOOSTER
(a) Remove the 4 nuts, pull out the brake booster.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
(b) Remove the gasket from the brake booster.
(c) Loosen the lock nut then remove the clevis.
Torque: 25 Nm (250 kgf-cm, 18 ft. lbs.)
(d) Remove the check valve.
(e) Remove the 4 nuts, brake booster bracket and gasket from the brake booster.
Torque: 25 Nm (250 kgf-cm, 18 ft. lbs.)
INSTALLATION
Installation is in the reverse order of removal.
HINT:
-
Fill the brake reservoir with brake fluid and bleed brake system.
-
Check the brake pedal.
-
Do the operational check.