Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Cruise Control: Electrical Diagrams
Service Hints
E4 (A), E5 (B), E6 (C), E7 (D), E8 (E) ENGINE CONTROL MODULE
BATT - E1
: Always 9.0 - 14.0 volts
+BM - E1
: Always 9.0 - 14.0 volts
IGSW - E1
: 9.0 - 14.0 volts with the ignition SW at ON position
+B, +B1 - E1 : 9.0 - 14.0 volts with the ignition SW at ON position
STP - E1
: 7.5 - 14.0 volts with the brake pedal depressed
SPD - E1
: Pulse generation with the vehicle moving
C9 CRUISE CONTROL SW [COMB. SW]
5 - 4 : Approx. 1540 Ohms with the CANCEL SW on
: Approx. 240 Ohms with the RES/ACC SW on
: Approx. 630 Ohms with the SET/COAST SW on