Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
a. Turn the crankshaft pulley and align its groove with timing mark "0" of the No.1 timing belt cover.
b. Check that the timing marks of the camshaft timing pulleys and timing belt rear plates aligned. If not, turn the crankshaft 1 revolution (360°).
c. Remove the crankshaft pulley bolt.
NOTICE: Do not turn the crankshaft pulley.
17. REMOVE TIMING BELT TENSIONER
HINT:
-
When re-using timing belt:
If the installation marks have disappeared, before remove the timing belt, place 2 new installation marks on the timing belt to match the timing
marks of the camshaft timing pulleys.
-
When replacing timing belt tensioner only:
To avoid meshing of the timing pulley and timing belts secure one of them with string. And place matchmarks on the timing belt and RH
camshaft timing pulley.