Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
24. REMOVE TIMING BELT GUIDE
25. REMOVE TIMING BELT COVER SPACER
26. REMOVE TIMING BELT
HINT: If re-using the belt and the installation mark has disappeared from it, place a new installation mark on the timing belt to the match the dot
mark of the crankshaft timing pulley.
27. REMOVE NO.1 IDLER PULLEY AND NO.2 IDLER PULLEY
a. Using a 10 mm hexagon wrench, remove the bolt, No.1 idler pulley and plate washer.
b. Remove the bolt and No.2 idler pulley.
28. REMOVE CRANKSHAFT TIMING PULLEY
Using SST, remove the timing pulley.
SST 09950-50012 (09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05010)
NOTICE: Do not turn the timing pulley.
INSPECTION