Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Compressor Clutch: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE PRESSURE PLATE
a. Using SST and a socket wrench, remove the shaft bolt.
SST 07112-76060
Torque: 18 N.m (184 kgf.cm, 12.3 ft-lbf)
b. Install SST on the pressure palate.
SST 07112-66040
c. Using SST and socket wrench, remove the pressure plate.
SST 07112-66040, 07112-76060,