Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Specified amount:
Single A/C: 750 ±50 g (26.45 ±1.76 oz.)
Dual A/C: 1050 ± 50 g (37.03 ±1.76 oz.)
2. REMOVE CONDENSER FAN
3. REMOVE A/T OIL COOLER
4. REMOVE HORN
5. REMOVE HOOD LOCK
6. REMOVE CENTER BRACE
7. REMOVE RECEIVER AND HOLDER
8. DISCONNECT LIQUID TUBE AND DISCHARGE HOSE
Remove the 2 bolts and disconnect the both tube and hose.
Torque: 5.4 N.m (5.5 kgf.cm, 48 in.lbf)
NOTE: Cap open the fittings immediately to keep moisture or dirt out of the system.
HINT: At the time of installation, please refer to the following item.
Lubricate 2 new O-rings with compressor oil and install them to the tubes.
9. REMOVE CONDENSER