Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
REMOVE CENTER CLUSTER INTEGRATION PANEL
a. Remove the 2 screws.
b. Remove integration control panel by pulling the portions indicated by arrows in the illustration.
c. Disconnect the connector.
INSTALLATION
Installation is in the reverse order of removal.
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE BULBS
Remove the 3 bulbs.
2. REMOVE A/C AMPLIFIER
a. Remove the 7 screws and heater control housing.