Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1373002.png)
(a) Remove the 4 screws and 2 brackets.
(b) Pry out the packings.
HINT: At the time of installation, please refer to the following item.
-
Do not refuse the packing.
(c) Using a hexagon wrench (5.0 mm, 0.20 in.), remove the 2 bolts.
Torque: 5.4 N-m (55 kgf-cm, 48 in.-lbf)
(d) Remove the 3 bolts.
(e) Lift the A/C unit until the tube and accessary is removed.
(f) Remove the tube and accessary.
(g) Remove the holder and disconnect the heat sensing tube.
(h) Loose the 2 nuts and remove the expansion valve.
Torque:
