Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Heater Core Case: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE HEATER RADIATOR
a. Remove the 3 screws and 3 clamps.
b. Pull out the heater radiator.
c. Remove the 2 screws and 2 clips, then disconnect the heater radiator pipes.
2. REMOVE AIR VENT DUCT
Remove the 3 screws and duct.
3. REMOVE AIR OUTLET SERVOMOTOR
Remove the 3 screws and servomotor.
4. REMOVE AIR MIX SERVO MOTOR
Remove the 3 screws and servomotor.
5. REMOVE ASPIRATOR HOSE
REASSEMBLY
Reassembly is in the reverse order of disassembly.