Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1802001.png)
Brake Lamp: Component Tests and General Diagnostics
INSPECTION
1. INSPECT STOP LIGHT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.
2. W/ Rear Spoiler
INSPECT HI-MOUNTED STOP LIGHT ASSEMBLY CONTINUITY
Using the ohmmeter,check that continuity exists between terminal 1 and terminal 2.
If continuity is not as specified,replace the light assembly or bulb.
3. W/ Rear Spoiler
INSPECT HI-MOUNTED STOP LIGHT ASSEMBLY CONTINUITY
Using the ohmmeter,check that continuity exists between terminal 1 and terminal 2.
If continuity is not as specified,replace the light assembly or bulb.
