Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
c. Turn the light switch to DOOR, check that continuity exists between terminal 2 and 1.
If operation is as specified, replace the switch.
If continuity is not as specified, replace a bulb or rear personal light.
4. INSPECT LUGGAGE ROOM LIGHT SWITCH
a. Disconnect the connector from the interior light assembly.
b. Turn the interior light switch ON, check that continuity exists terminal 2 and body ground.
c. Turn the interior light switch to DOOR, check that continuity exists between terminals 1 and 2.
If operation is not as specified, replace the switch.