Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1870001.png)
Trunk Lamp Switch: Testing and Inspection
INSPECT LUGGAGE ROOM LIGHT SWITCH
a. Disconnect the connector from the interior light assembly.
b. Turn the interior light switch ON, check that continuity exists terminal 2 and body ground.
c. Turn the interior light switch to DOOR, check that continuity exists between terminals 1 and 2.
If operation is not as specified, replace the switch.
INSPECT BACK DOOR COURTESY SWITCH CONTINUITY
If continuity is not as specified,replace the back door lock assembly.
