Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
3. Using SST tighten the union bolt to the specified torque.
SST 09612-24014 (09617-24011)
Torque:
33 N.m (340 kg.cm, 24 ft.lb) for use with SST
39 N.m (400 kg.cm, 29 ft.lb)
HINT: Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).
c. When connecting the flare nut on the high pressure pipe union, observe these procedures:
1. Apply a light coat of engine oil to the flare nut, and tighten the flare nut by hand.
2. Using SST, tighten the flare nut to the specified torque.
SST 09023-38400
NOTE: Do not rotate the fuel filter outlet, when tightening the flare nut.
Torque:
28 N.m (285 kg.cm, 21 ft.lb) for use with SST
34.3 N.m (350 kg.cm, 25 ft.lb)
HINT: Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).
d. Observe these precautions when removing and installing the injectors.
1. Never reuse the O-ring.
2. When placing a new 0-ring on the injector, take care not to damage it in any way.
3. Coat a new O-ring with spindle oil or gasoline before installing-never use engine, gear or brake oil.