Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
G.
From the underside of the vehicle, install the supply line retaining nut.
H.
From the underside of the vehicle install the return line retaining nut.
HINT:
At time of installation, use new 0-rings lubricated with ND Oil 8 (or equivalent).
Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf)
10.
Front Expansion Valve
Please follow the instructions for front expansion valve removal and replacement in the Technical Information System (TIS), 2003 Sequoia Repair
Manual, Air Conditioning: Cooling Unit.
11.
Installation of Liquid Line B.
A.
Ensure that the line being installed is the new part with the in-line filter as shown in Figure 14.
HINT:
At the time of installation lubricate the 0-rings with ND Oil 8 (or equivalent).
B.
Install the 2 piping clamps at the bulkhead end of liquid line B.
C.
Install the liquid line retaining nut.
HINT:
Lubricate the threads with ND Oil 8 (or equivalent) to ensure proper torque.
Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf)
12.
Installation of Suction Tube
A.
Install the suction tube into the vehicle.