toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Pressure, Vacuum and Temperature Specifications|Page 1364 > < Pressure, Vacuum and Temperature Specifications|Page 1362
Page 1
background image

Engine Oil: Service and Repair

REPLACEMENT  

CAUTION:  
-

Prolonged and repeated contact with mineral oil will result in the removal of natural fats from the skin, leading to dryness, irritation and
dermatitis. In addition, used engine oil contains potentially harmful contaminants, which may cause skin cancer.

-

Care should be taken, therefore, when changing engine oil to minimize the frequency and length of time your skin is exposed to used
engine oil. Protective clothing and gloves that cannot be penetrated by oil should be worn. The skin should be thoroughly washed with
soap and water, or use water-less hand cleaner, to remove any used engine oil. Do not use gasoline, thinners, or solvents.

-

In order to preserve the environment, used oil and used oil filters must be disposed of only at designated disposal sites. 

1. w/Oil filter change:

REMOVE ENGINE UNDER COVER

2. DRAIN ENGINE OIL

a. Remove the oil filler cap
b. Remove the oil drain plug and gasket, and drain the oil into a container

3. REPLACE OIL FILTER

a. Using SST, remove the oil filter 

SST 09228-07501

b. Clean the oil filter contact surface on the oil filter mounting
c. Lubricate the filter rubber gasket with clean engine oil

d. Tighten the oil filter by hand until the rubber gasket contacts the seat of the filter mounting.

Pressure, Vacuum and Temperature Specifications|Page 1364 > < Pressure, Vacuum and Temperature Specifications|Page 1362