Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
3. 4WD: DISCONNECT DRIVE SHAFT
a. Remove the cotter pin and lock cap.
b. While applying the brakes, remove the lock nut.
4. DISCONNECT SPEED SENSOR AND WIRE HARNESS CLAMP FROM STEERING KNUCKLE
Remove the 2 bolts and disconnect the speed sensor and wire harness clamp from the steering knuckle.
5. REMOVE BRAKE CALIPER AND DISC
a. Remove the bolt and brake line clamp from the steering knuckle.
b. Remove the 2 bolts, brake caliper and disc.
NOTICE: Do not damage the brake tube.
c. Support the brake caliper securely.
6. REMOVE SHOCK ABSORBER
7. DISCONNECT LOWER BALL JOINT
Remove the 4 bolts and disconnect the lower ball joint.