Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-660002.png)
2. REMOVE CRANKSHAFT POSITION SENSOR
a. Disconnect the crankshaft position sensor connector
b. Remove the bolt and crankshaft position sensor
INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
a. Install the crankshaft position sensor with the bolt.
Torque: 6.5 N.m (65 kg.cm, 58 in.lb)
b. Connect the crankshaft position sensor connector.
2. INSTALL ENGINE UNDER COVER
