Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Fuel Pump Ballast Resistor: Testing and Inspection
INSPECTION
1. REMOVE FUEL PUMP RESISTOR
2. INSPECT FUEL PUMP RESISTOR
Using an ohmmeter, measure the resistance between the terminals.
Resistance: 0.70 - 0.76 Ohms at 20 °C (68 °F)
If the resistance is not as specified, replace the resistor.
3. REINSTALL FUEL PUMP RESISTOR
Torque: 8 N.m (82 kg.cm,71 in.lb)