Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-921002.png)
4. REMOVE CAMSHAFT POSITION SENSOR
Remove the bolt, stud bolt and camshaft position sensor.
INSTALLATION
1. INSTALL CAMSHAFT POSITION SENSOR
Install the camshaft position sensor with the bolt and stud bolt.
Torque: 7.5 N.m (80 kg.cm, 66 in.lb)
2. INSTALL LH NO.3 TIMING BELT COVER
3. INSTALL DRIVE BELT
4. FILL ENGINE COOLANT
5. CHECK ENGINE COOLANT FOR LEAKS
6. CHECK IGNITION TIMING
