toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Exhaust System - Excessive Exhaust Sulphur Odor|Page 3889 > < Exhaust System - Excessive Exhaust Sulphur Odor
Page 2
background image

NOTE:

Authorized Modification Label may be ordered in packages of 25 from the Materials Distribution Center (MDC) through Dealer Daily or by calling
the MDC.

Required SSTs

NOTE:

Additional Diagnostic Tester Kits, Program Cards or other SSTs may be ordered by calling SPX/OTC. 

ECM (PCM) Identification Chart

NOTE:

^

Do not use the CAN Interface Module when reprogramming 2001 model year Sequoia vehicles.

^

2003 model year Sequoia vehicles, which have been flash reprogrammed using the procedures in this TSB, will contain upgraded 2004 model
year OBD II logic. Refer to the 2004 model year Sequoia Repair Manual information on the Technical Information System (TIS) when checking
Powertrain Diagnostic Trouble Codes (DTCs) on 2003 model year vehicles that have been reprogrammed.

ECM Reprogram Procedure

Exhaust System - Excessive Exhaust Sulphur Odor|Page 3889 > < Exhaust System - Excessive Exhaust Sulphur Odor