Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Airbag Sensor Assembly: Testing and Inspection
Side and Curtain Shield Airbag Sensor
Collision / Non-Collision Inspections
Vehicles not involved in collision:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check.
Vehicles involved in collision and airbag is not deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check.
Vehicles involved in collision and airbag is deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Replace the side and curtain shield airbag sensor assembly.
*Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Displaying & Reading Trouble Codes
Replacement Requirements
REPLACEMENT REQUIREMENTS
In the following cases, replace the side and curtain shield airbag sensor assembly.
-
If the side and curtain shield airbag assembly has been deployed in a collision.
-
If the side and curtain shield airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the side and curtain shield airbag sensor assembly has been dropped.
CAUTION: For removal and installation of the side and curtain shield airbag sensor assembly, be sure to follow the correct procedure.