toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Replacement Requirements|Page 5814 > < Replacement Requirements|Page 5812
Page 8
background image

-

Covering method using a cardboard box:
Cover the steering wheel pad with the cardboard box and weight the cardboard box down in 4 places with at least 190 N (20 kg, 44 lb).

Size of cardboard box:
Must exceed the following dimensions:
X = 460 mm (18.11 in.)
Y = 650 mm (25.59 in.)

NOTE:
-

When dimension Y of the cardboard box exceeds the diameter of the disc wheel with tire to which the steering wheel pad is tied, X should
be the following size, X 460 mm (18.11 in.) + width of tire

-

If a cardboard box smaller than the specified size is used, the cardboard box will be broken by the shock from the airbag deployment.

-

Covering method using tires:
Place at least 3 tires without disc wheel on top of the disc wheel with tire to which the steering wheel pad is tied.

Tire size: Must exceed the following dimensions-
Width: 185 mm (7.87 in.)
Inner diameter: 360 mm (14.17 in.)

CAUTION:  Do not use tires with disc wheels.

NOTE:  The tires may be marked by the airbag deployment, so use the redundant tires.

f.

Deploy the airbag.
1

.Connect the SST red clip to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.

2

.Check that no one is within 10 m (33 ft) area around the disc wheel which the steering wheel pad is tied to.

Replacement Requirements|Page 5814 > < Replacement Requirements|Page 5812