Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
-
Never reuse the sensor involved in a collision when the SRS has deployed.
-
Never repair a sensor in order to reuse it.
1. LH: REMOVE FRONT AIRBAG SENSOR
a. Remove the battery carrier, battery and battery tray.
b. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with sensor assembly installed
c. Remove the 2 bolts and front airbag sensor LH.
2. RH: REMOVE FRONT AIRBAG SENSOR
a. Remove the air cleaner assembly.
b. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with sensor assembly installed.
c. Remove the 2 bolts and front airbag sensor RH.
INSTALLATION