Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
1. REMOVE FRONT SEAT
a. Remove the 4 seat track covers and 4 bolts.
b. Disconnect the power seat and side airbag connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
c. Remove the front seat.
NOTE: Be careful not to damage the body.
2. REMOVE HEADREST
3. REMOVE FRONT SEAT CUSHION SHIELD
a. Remove the screw.
b. Using a screwdriver, remove the front seat cushion shield, then disconnect the connector.
HINT: Tape the screwdriver tip before use.
4. REMOVE SLIDE KNOB AND RECLINING KNOB
Using a screwdriver, remove the slide knob and reclining knob.
HINT: Tape the screwdriver tip before use.
5. REMOVE SWITCH BASE
Using a screwdriver, remove the switch base.
HINT: Tape the screwdriver tip before use.