Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
*Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
REPLACEMENT REQUIREMENTS
In the following cases, replace the side and curtain shield airbag sensor assembly.
-
If the side and curtain shield airbag assembly has been deployed in a collision.
-
If the side and curtain shield airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the side and curtain shield airbag sensor assembly has been dropped.
CAUTION: For removal and installation of the side and curtain shield airbag sensor assembly, be sure to follow the correct procedure.
AIRBAG SENSOR FRONT
INSPECTION
1. VEHICLES NOT INVOLVED IN COLLISION
Do a diagnostic system check. *
2. VEHICLES INVOLVED IN COLLISION
a. Do a diagnostic system check. *
b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the front airbag sensor, which includes the following
items even if the airbag was not deployed:
-
Check the bracket deformation.
-
Check the paint peeling off the bracket.
-
Check the cracks, dents or chips in the case.
-
Check the cracks, dents, chipping and scratches in the connector.
-
Check the peeling off of the label or damage to the serial number.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
REPLACEMENT REQUIREMENTS
In the following cases, replace the front airbag sensor.
-
If the SRS has been deployed in a collision. (Replace both the left and right airbag sensors.)
-
If the front airbag sensor has been found to be faulty in troubleshooting.
-
If the front airbag sensor has been found to be faulty during checking items.
-
If the front airbag sensor has been dropped.
CAUTION: Be sure to follow the correct procedure for removal and installation of the front airbag sensor.