Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-212001.png)
Vehicle Speed Sensor: Service and Repair
Vehicle Speed Sensor NO.1 on-vehicle repair
Vehicle Speed Sensor NO.1
1. DISCONNECT NO.1 VEHICLE SPEED SENSOR CONNECTOR
2. REMOVE NO.1 VEHICLE SPEED SENSOR
Remove the bolt and No.1 vehicle speed sensor.
3. DISASSEMBLE NO.1 VEHICLE SPEED SENSOR
(a) Remove the o-ring from the speed meter driven gear assembly.
(b) Remove the clip and speed meter driven gear from the speed meter driven gear sleeve.
4. ASSEMBLE NO.1 VEHICLE SPEED SENSOR
(a) Install the speed meter driven gear and clip to the speed meter driven gear sleeve.
(b) Coat a new 0-ring with ATF.
