Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1184001.png)
Alternator: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE REAR END COVER
a. Remove the nut and terminal insulator.
b. Remove the bolt 3 nuts, plate terminal and end cover.
2. REMOVE BRUSH HOLDER
a. Remove the brush holder cover from the brush holder.
b. Remove the 2 screws and brush holder.
c. Remove the seal plate from the rectifier end frame.
3. REMOVE VOLTAGE REGULATOR
Remove the 3 screws and voltage regulator.
