Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1275003.png)
REMOVAL
NOTICE: Remove the steering wheel assembly before the steering gear removal, because there is possibility of breaking of the spiral cable.
1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE STEERING WHEEL PAD
3. REMOVE STEERING WHEEL
4. DISCONNECT RIGHT-HAND AND LEFT-HAND TIE ROD ENDS
5. DISCONNECT NO. 2 INTERMEDIATE SHAFT ASSEMBLY
6. DISCONNECT CLAMP PLATE
