Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1276004.png)
1. REMOVE 2 TURN PRESSURE TUBES
a. Using Special Service Tool (SST), remove the 2 turn pressure tubes.
SST 09023-38400
b. Remove the 4 O-rings from the tubes.
2. SECURE PS GEAR ASSEMBLY IN VISE
Using SST, 2 bolts and nuts, secure the gear assembly in a vise, as shown in the illustration.
SST 09612-00012
Reference:
Bolt: 90105-10346
Nut: 90170-10198
HINT: Use 2 of the same type of SST.
3. REMOVE RIGHT-HAND AND LEFT-HAND TIE ROD ENDS AND LOCK NUTS
a. Place matchmarks on the tie rod end, lock nut and rack end.
b. Loosen the lock nut, remove the tie rod end and lock nut.
c. Employ the same manner described above to the other side.
