Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
REASSEMBLY
NOTICE: When using a vise, do not overtighten it.
1. COAT PARTS INDICATED BY ARROWS WITH POWER STEERING FLUID OR MOLYBDENUM DISULFIDE LITHIUM BASE
GREASE
2. INSTALL OIL SEAL
a. Coat a new oil seal lip with power steering fluid.
b. Using Special Service Tool (SST), press in the oil seal.
SST 09950-60010 (09951-00330, 09951-00490, 09952-06010), 09950-70010 (09951-07360)
NOTICE:
^
Make sure to install the oil seal facing in the correct direction.
^
Take care that the oil seal does not get reversed as you install it.
3. INSTALL STEERING RACK
a. Install SST to the rack.
SST 09631-20051
HINT: If necessary, scrape the burrs off the rack teeth end and burnish.
b. Coat the SST with power steering fluid.
c. Install the steering rack into the rack housing.
NOTICE: Be careful not to damage the oil seal lip.
d. Remove the SST.
SST 09631-20051