Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Lateral Stabilizer Rod: Service and Repair
REMOVAL
1. SUPPORT REAR AXLE HOUSING WITH JACK
2. REMOVE LATERAL CONTROL ROD
Remove the 2 bolts, nut, washer and lateral control rod.
Torque:
A: 140 Nm (1,428 kgf-cm, 103 ft. lbs.)
B: 130 Nm (1,326 kgf-cm, 96 ft. lbs.)
HINT: At the time of installation, please refer to the following items.
^
Replace the used nut with a new one.
^
After stabilizing the suspension, torque the nut and bolt.
INSTALLATION
Installation is in the reverse order of removal.