Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1304001.png)
Stabilizer Bar: Service and Repair
Front
REMOVAL
1. DISCONNECT STABILIZER BAR LINKS
Remove the 2 nuts and disconnect the stabilizer bar links from the lower suspension arms.
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
2. REMOVE STABILIZER BAR
a. Remove the 2 bolts, nuts and stabilizer bar with the cushions and brackets.
b. Remove the 2 brackets and cushions from the stabilizer bar.
