Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
/Page-1322001.png)
Wheel Bearing: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. 2WD: REMOVE GREASE CAP
a. Mount the axle hub in a soft jaw vise.
HINT: Close the vise until it holds hub bolts. Do not tighten further.
b. Using a screwdriver, remove the grease cap.
2. 4WD: REMOVE OIL SEAL (INSIDE)
a. Mount the axle hub in a soft jaw vise.
HINT: Close the vise until it holds hub bolts. Do not tighten further.
