Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
2. REMOVE REAR DOOR SCUFF PLATE
a. Remove the 3 screws.
b. Using a screwdriver, remove the rear door scuff plate.
HINT: Tape the screwdriver tip before use.
3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP
4. REMOVE DOME LIGHT
a. Using a screwdriver, remove the lens.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 screws and dome light, then disconnect the connector.
5. REMOVE REAR TRIM COVER
Using a screwdriver, remove the rear trim cover.