Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
6. REMOVE INNER REAR VIEW MIRROR
Remove the inner rear view mirror as shown in the illustration.
7. REMOVE WIPER ARMS
a. Using a screwdriver, remove the 2 caps.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 nuts and wiper arms.
8. REMOVE COWL TOP VENTILATOR LOUVER
a. Remove the hood to cowl top seal.
b. Using a clip remover, remove the 6 clips.
c. Remove the 8 screws and cowl top ventilator louver.
9. REMOVE ROOF SIDE RAIL WEATHERSTRIP
Using SST, pull off the root side rail weatherstrip from front end.
SST 09806-30010
10. REMOVE WINDSHIELD OUTSIDE MOULDINGS
Remove the 8 screws and windshield outside mouldings.
11. REMOVE WINDSHIELD OUTSIDE UPPER MOULDING
Using a knife, cut off the moulding as shown in the illustration.
NOTE: Do not damage the body with the knife.